Connecting The Datalogger To A Computer - Campbell CR300 series Getting Started Manual

4. Connecting the datalogger to
a computer
Once you have configured your hardware connection (see
page 2)(see Setting up Communications with the Datalogger
datalogger and computer can communicate.
PC200W and PC400 users, select the datalogger from the list and click Connect
l
LoggerNet users, select Main and click Connect
l
datalogger from the Stations list, then Connect
To disconnect, click Disconnect .
USB or RS-232 communications
for more information), your
on the LoggerNet toolbar, select the
.

4. Connecting the datalogger to a computer

on
.
6