Collecting Data; Collecting Data Using Loggernet; Collecting Data Using Pc200W Or Pc400 - Campbell CR300 series Getting Started Manual

8. Collecting data

The datalogger writes to data tables based on intervals and conditions set in the CRBasic
program. After the program has been running for enough time to generate data records, data
may be collected by using datalogger support software. During data collection, data is copied to
the computer but still remains on the datalogger. Collections may be done manually, or
automatically through scheduled collections set in LoggerNet Setup. Use these instruction or
follow a tutorial.

8.1 Collecting data using LoggerNet

1. LoggerNet users, select Main and Connect
logger from the Stations list, then click Connect
2. Click Collect Now
3. After the data is collected, the Data Collection Results window displays the tables collected
and where they are stored on the computer.
4. Select a data file, then View File to view the data. See
information.

8.2 Collecting data using PC200W or PC400

1. PC200W and PC400 users, click Connect
2. Select the Collect Data tab.
3. Select an option for What to Collect. Either option creates a new file if one does not
already exist.
New data from datalogger (Append to data files): Collects only the data in the selec-
l
ted tables stored since the last data collection and appends this data to the end of
the existing table files on the computer. This is the default, and most often used
option.
.
on the LoggerNet toolbar, select the data-
.
Viewing historic data
.
(p. 15) for more
8. Collecting data 13