Loading Paper And Specialty Media; Loading The Standard Or Optional 520-Sheet Tray; Configuring Universal Paper Settings; Setting The Paper Size And Type - Lexmark X950 Quick Reference

Note: View the printer IP address on the printer control panel
home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
2
Click Settings or Configuration.
3
Click Device Solutions > Solutions (eSF), or click Embedded
Solutions.
4
From Installed Solutions, click the name of the application you want
to configure.
5
Click Configure > Import.
6
Browse to the saved configuration file that was exported from a
previously configured printer, and then load or preview it.
Note: If a timeout occurs and a blank screen appears, then
refresh the Web browser, and then click Apply.
Loading paper and specialty
media

Setting the paper size and type

The Paper Size setting is automatically sensed according to the position
of the paper guides in each tray except the multipurpose feeder. The
Paper Size setting for the multipurpose feeder must be set manually
from the Paper Size menu. The Paper Type setting must be set manually
for all trays that do not contain plain paper.
From the home screen navigate to:
> Paper Menu > Paper Size/Type > select a tray > select the paper
size or type > Submit

Configuring Universal paper settings

The Universal Paper Size is a user‑defined setting that lets you print on
paper sizes that are not preset in the printer menus. Set paper size to
Universal for the specified tray when the size you want is not available
from the Paper Size menu. Then, specify all of the following Universal
size settings for your paper:
• Units of Measure
• Portrait Width
• Portrait Height
Notes:
• The largest supported Universal size is 296.9 x 431.8 mm
(11.69 x 17 in.).
• The smallest supported Universal size is 76 x 127 mm (3 x 5 in.)
and is loaded only in the multipurpose feeder.
1
From the home screen, navigate to:
> Paper Menu > Universal Setup > Units of Measure > select
a unit of measure
2
Touch Portrait Width or Portrait Height.
3
Select the width or height, and then touch Submit.
Loading the standard or optional
520‑sheet tray
The printer has one standard 520‑sheet tray (Tray 1), and may have
one or more optional 520‑sheet trays. All 520‑sheet trays support the
same paper sizes and types.
CAUTION—POTENTIAL INJURY: To reduce the risk of
equipment instability, load each paper drawer or tray
separately. Keep all other drawers or trays closed until
needed.
1
Pull the tray out.
5
Notice the size indicators at the bottom of the tray. Use these
indicators to help position the length and width guides.
2
Squeeze and then slide the width guide to the correct position for
the paper size loaded.
3 Squeeze and then slide the length guide to the correct position for
the paper size loaded.
Note: The length guide has a locking device. To unlock, slide the
button on top of the length guide down. To lock, slide the
button up when a length has been selected.