Download Print this page

The Quick Release Strap - Oar Board Rower User Manual

Advertisement

Quick Release Strap
& Optional Pull Strap
See the Video online at www.OarBoard.com
Step1: First place your feet into the straps located on the foot stop. The two Velcro ends of the Quick Release
Strap are held in place by centering them horizontally on the inside flaps of each side of the 2" foot stop straps.
Step 2: The Quick Release Strap runs across from the right foot to the left foot, and adheres to both sides of
the Velcro on the inside of the foot stop straps. When pulled, it will open both of the foot stop straps at once.
Step 3: Another optional accessory is the Pull Strap that is recommended for use when rowing in conditions
where capsize is more likely. The Pull Strap attaches to the Quick Release Strap and to your leg.
To attach the Pull Strap to your leg circle the longer Velcro part of the Pull Strap snugly around the top of
your calf just below the knee. Orient the Pull Strap so it will hang down between your calves. The Pull Strap
makes it easier to release the foot stop straps, as you do not have to reach down to your feet.
Test! If the foot stop straps release when the Quick Release Strap is pulled it is set up correctly.
Ste 1
Ste
Ste
Ste 1
Ste
Ste
Page 7

Advertisement

loading