Oar Board Rower User Manual page 4

Attaching the Oar Board® Rower to an Adventure/Fitness Row SUP with deck rings

The Oar Board® Rower comes almost fully assembled, as compact as possible for shipping or storage.

ow to et

See the

it up and get it ready to attach to your Adventure/Fitness Row SUP.

Step 1: Place your Oar Board® with the seat end of the unit at a point about 2 inches behind the lift handle or balance

point of the board & centered in the middle. A little extra buoyancy forward makes for better rowing, especially into waves.

Step 2: Take your Kwik-Lok strap and fold the buckle back on itself so the sticker side is flush against the strap as shown.

Step 3: Feed the strap through the gap in the Oar Board® Rower and through the SUP deck ring being sure to first go over

the deck ring then under and through.

Step 4: Continue feeding the strap back through the gap in to the Oar Board® going under the strap and buckle and out the

other side and directly through the SUP deck ring.

See the Video online at www.OarBoard.com

o r Oar Board

ower nit

a e

and ee the

online ideo

Step

for more information on how to set

Step

Page 4

Table of Contents