Advertisement
Step 5: The stopper fitting comes on and off with a single wingnut and functions to keep the carriage in place on the base.
Remove the stopper to slide the carriage off to carry it separately. The optional stern light/cam mount or the forward view
mirror locates on this fitting as well.
Step 6: Insert the footboard into the correct position for your height. You must be able to extend your legs all the way out. If
the footboard is set too close you will push yourself off the seat when rowing. The footboard keeps your feet in position with
Velcro straps, and is held in position by the pin on each side. Make sure these pins are fully inserted.
'Quick Release Foot Strap' on page 7
Step 7: See the
for more information
see the video online at www.OarBoard.com
Attaching the Oar Board® Rower to your Adventure/Fitness Row SUP (page
Step 8: See
Board®Rower to a Standard SUP without Deck Rings (Page
get yourself ready to hit the water!
How to set up your Oar Board® Rower Unit
See the Video online at www.OarBoard.com
Step 6
for detailed instructions on the Quick Release feature, and
6) and for more information see the
Step 5
Attaching the Oar
4) or
videos online
Step 6
to
Page 3
Advertisement
