Advertisement
Attaching the Oar Board® Rower to an Adventure/Fitness Row SUP with deck rings
Step 5: Loop the strap through the deck ring and back inside the Oar Board® Rower. Feed the strap under the buckle and
up through the back space and then down through the front space of the buckle.
Step 6: Hand tighten the strap so that you have to put some pressure on to the buckle to flip it over and close it. The
sticker should now be facing up. *Note - don't tighten straps to the max, only enough so the Oar Board® stays in place.
Tuck the excess end of the strap through the Oar Board® Rower.
Simply repeat this procedure with the second strap! Relieve tension on the straps when not in use.
To release simply grip the free end of the strap and pull up keeping your fingers clear.
Step 7: Get out on the water and enjoy a row on your new Oar Board® Rower and Adventure/Fitness Row SUP!
See the Video online at www.OarBoard.com
Step
Step
Step
Step
Step
Page 5
Advertisement
