Hammond XK-5 Service Manual page 63

XK-5
Endblock(L) assy
Next, Remove the 4 cable from the SWH-536A assy, 1 cable from the Endblock(L) assy and
1 cable from the MXH-40A assy(OLED Unit assy cable).
4.
REMOVE THE
B
A
C
First, Remove the 8 Vollume Knobs of A , 1 Encoder Knob of B and 1 VC knob of C from the SW PWB assy.
TOP PANEL BKT(L)
SW PWB ASSY(TP-L)
OLED UNIT ASSY
Remove the 2 screws of A (S tite, 3x5, Bind, ZnB) from the Top panel BKT(L).
Next, Remove total of 19 screw of A (S tite, 3x5, Bind, ZnB) from the SW PWB assy (TP-L), (TP-R) and OELD unit assy.
(9 screws of SW PWB TP-L assy, 6 screws of SW PWB TP-R assy and 4 screws of OELD unit assy)
SW PWB ASSY(TP-L)(TP-R) & OLED UNIT ASSY:
OLED Unit assy Cable
Next, remove a nut using Long-nose pliers like the picture.
And pull the connector out.
Rotary switch
9-2
SWH-538A
MXH-40A
A
SW PWB ASSY(TP-R)
= A