Philips ColorBlaze TRX Manual page 37

You can download QuickPlay Pro
E
from www.philipscolorkinetics.com/support/
addressing.
Addressing and Configuring ColorBlaze TRX
with QuickPlay Pro
In Ethernet lighting installations, you can remotely address and configure ColorBlaze
TRX fixtures by connecting a computer running QuickPlay Pro addressing and
configuration software to the lighting network. You can either connect the computer
to an available port on an Ethernet switch, or to the data input on the first
ColorBlaze TRX fixture in a series. In Ethernet, QuickPlay Pro will automatically
discover all connected fixtures for easy configuration.
QuickPlay Pro
software
Ethernet
Switch
1. Connect a computer running QuickPlay Pro to an available port on an Ethernet
switch, or to the data input on the first ColorBlaze TRX fixture in a series, using
a standard RJ45 patch cable.
2. Run QuickPlay Pro, and click Fixture Configuration.
3. Click the Refresh button to the right of the Controller list. QuickPlay Pro
automatically discovers all connected ColorBlaze TRX fixtures and enters them,
by IP address, in the Controller list. Select a fixture to configure from the list.
ColorBlaze TRX
ColorBlaze TRX
37
Product Guide