To Display Firmware Versions; To Display Serial Numbers; To Display Temperatures; Resetting System Settings - Philips ColorBlaze TRX Manual

2. Using the Up and Down buttons, scroll through the list of settings.
Settings Overview displays information on current starting DMX address, IP
address, fixture mode, segment order, dimming curve, transition speed, fixture
resolution, color control mode, and MAC address.
3. Press Return to exit Settings Overview.

To display firmware versions:

►
1. Select Utilities > Information > Firmware Versions.
2. Using the Up and Down buttons, scroll through the list.
Firmware Versions displays the versions of the firmware currently installed on
the main controller board, the LED controller boards (three LED boards for
each 2 ft fixture; nine for each 6 ft fixture), and the fan controller boards (one
fan board for each 2 ft fixture; 3 fan boards for each 6 ft fixture).
3. Press Return to exit Firmware Versions.

To display serial numbers:

►
1. Select Utilities > Information > Serial Numbers.
2. Using the Up and Down buttons, scroll through the list.
Serial Numbers displays the serial numbers assigned to the fixture's main
controller board and the LED controller boards (three LED boards for each 2 ft
fixture; nine for each 6 ft fixture).
3. Press Return to exit Serial Numbers.

To display temperatures:

►
1. Select Utilities > Information > Temperature.
2. Using the Up and Down buttons, scroll through the list.
Temperatures displays, in degrees C, the current ambient temperature, and the
internal operating temperatures of the power supply and LED controller boards
(three LED boards for each 2 ft fixture; nine for each 6 ft fixture).
3. Press Return to exit Temperature.
To display fan speeds:
►
1. Select Utilities > Information > Fan Speeds.
2. If necessary, use the Up and Down buttons to scroll through the list.
Fan Speeds displays, in RPM, the speed of each fan (two fans for each 2 ft
fixture; six fans for each 6 ft fixture).
3. Press Return to exit Fan Speeds.

Resetting System Settings

You can load a fixture's default profile at any time to restore the fixture's initial
system settings.
To restore a fixture's initial system settings:
►
Select Utilities > Fixture Profiles > Reset System Settings.
▪
36
ColorBlaze TRX Product Guide