Code 128 Settings; 1/ General; 2/ Ean 128: Group Separator - Baracoda BBR-LA Programming Manual

3.10/ Code 128 Settings

3.10.1/ General

Code 128/EAN 128 - not active
Code 128/EAN 128 – active (*)

3.10.2/ EAN 128: Group Separator

'FNC1' included in an EAN128 code is transmitted by default as 'GS' (Group Separator – 0x1D).
(Feature enablde for CPU firmware version > 3.00)
Enable GS transmission (*)
It is possible to replace that 'GS' data to an other ASCII data.
(Feature enabled for CPU firmware version > 3.00)
Define GS
© Baracoda 2006
RoadRunners BRR-L Programming guide
START
Read « define GS » label
Read intermediary label
Corresponding to the next character to set for the
replacing data of GS
NO
Finished ?
YES
Read « END of config » label
END
Code 128/EAN 128 - barcode length - any length (*)
Code 128/EAN 128 - barcode length - minimum
length = 6
Disable GS transmission
End of configuration
dec 2006
19/29