Table of Contents
Advertisement
PCG10 / K8016
There are also following sample files on the disk:
PIANO1.LIB
SAMPLE_1.LIB
The library file is a text file including 2 to 32000 points of waveform data. The
data is entered either in floating point format or integer format. The data range
for floating point format is -1.0 to +1.0 and for integer format 0 to 255. Entered
values are separated by line feed.
In this mode you can activate or deactivate the low pass filter of the generator
output.
Sweep Generator
You can enter the Start and Stop frequencies. The sweep ranges are
indicated on the buttons.
The sweep repetition rate is proportional to the sweep frequency range
selected.
Sync output supplies a high going pulse at the start of each sweep. This
pulse is useful for triggering scopes or other equipment at the start of each
sweep.
Repetition rate
1ms
10ms
100ms
1s
10s
Noise Generator
In this mode the generator output is a noise sequence. The peak amplitude
is equal to the Amplitude Vpp value. The amplitude of the signal is Gaussian
distributed. The sequence repetition rate is proportional to the noise
frequency range selected.
Repetition rate
1ms
10ms
100ms
1s
10s
100s
Piano sound
Song sample (Listen on 1Hz range at 0.1Hz frequency)
Sweep range
1kHz-1MHz
100Hz-5kHz
10Hz-500Hz
1Hz-50Hz
0.1Hz-5Hz
Noise frequency range
2kHz-16MHz
200Hz-1.6MHz
20Hz-160kHz
2Hz-16kHz
0.2Hz-1.6kHz
0.02Hz-160Hz
9
Advertisement
Table of Contents
