Table of Contents
Advertisement
Repeating the same data value
If you like to repeat same data value for consecutive data points you can type
the value only once and type in parenthesis, on the same line, the count how
many times the value is repeated.
Increasing the space between the data points
In normal case the data points are connected with diagonal or horizontal lines
together. All the data points are equally distributed over the wave period.
If you like to increase the distance between two data points you can type the
distance in parenthesis on separate line between the data values.
Removing diagonal line between the data points
To get fast edges to the wave you can prevent the software from connecting
the consecutive data points with a diagonal line. To do this, write (0) on
separate line between the data values. The data points are connected with
rectangular line going immediately to the level of the next data value.
12
The contents of the file:
0.0
-1.0
-0.0 (10)
1.0
0.0
The contents of the file:
-1.0 (3)
(10)
1.0 (3)
The contents of the file:
-1,0
-1.0
(0)
0.0
(0)
1.0
PCG10 / K8016
Advertisement
Table of Contents
