Table of Contents
Advertisement
PCG10 / K8016
Display mode
The magnitude can be expressed either in volts or in decibels.
There are four vertical scale display modes: Volts (RMS), 10dB/div, 5dB/div
and 1dB/div.
Horizontal scale can be either logarithmic or linear. In linear mode it is
possible start the measurement from DC (0Hz).
Frequency stepping
There are two alternative stepping modes: logarithmic and linear. If the
checkbox Log. Freq. Steps is checked the frequency step is at the first decade
equal to the start frequency and on the next decades equal to the first
frequency of the decade.
If the checkbox is not checked the frequency step is equal to the start
frequency.
It is possible change the frequency step "on-the-fly" by selecting the Options
menu item Frequency Step Size.
18
Advertisement
Table of Contents
