Table of Contents
Advertisement
SOFTWARE CONTROLS
•
Remark: Due to software upgrades, the actual menus can differ from the
ones described in this manual, please also refer to the Help file (English
only)
Function Generator Mode
Four standard waveforms and DC are included:
Sine
Square
Triangle
Sine(x)/x
Each of these waveforms is generated using Direct Digital Synthesis to
insure very low noise, and low output distortion. Direct digital synthesis (DDS)
enables 5 -digit frequency resolution. The output signal is smoothed by a low
pass filter.
Library Functions (LIB)
This mode can be found by clicking the More Funct. button and then the LIB
button. A set of library waveform files are included on the disk.
Waveforms of 32000 data points:
File name
BURST1.LIB
BURST2.LIB
DAMP_WAV.LIB
EXP_DEC.LIB
EXP_INC.LIB Exponential rise
GAUSSIAN.LIB
RAMP_DN.LIB
RAMP_UP.LIB
Following files are easy to modify with Wave Editor:
BURST01.LIB
PULSES1.LIB
RECT1.LIB
Editor)
SAW1.LIB
SINE1.LIB
STAIRS1.LIB Stairs Stairs wave
TRAP1.LIB
TRI_SKW.LIB
TRI1.LIB
8
Description
Sine burst (1 cycle)
Sine burst (2 cycles)
Damping wave
Exponential decay
Gaussian pulse
Ramp down
Ramp up
Sine burst (Only 21 data points)
Pulses of different amplitude
Rectangular pulse (Easy to change duty cycle with Wave
Sawtooth wave
Sine wave (Only 21 data points)
Trapezoidal wave
Triangle wave with skew
Triangle wave
PCG10 / K8016
Advertisement
Table of Contents
