Table of Contents
Advertisement
PCG10 / K8016
CONNECTIONS
Survey of the connections and controls
1.BNC signal output connector (50ohm max 10Vpp)
2.BNC external trigger output (TTL level)
3.Output ready LED (indicates if output signal is present)
4.Power indication LED (software driven)
5.Adapter connection (observe the polarity!)
6.Parallel port connector to computer
7.Parallel pass through connector for optional PC scope (PCS500, PCS100 /
K8031)
The unit is connected to the printer port
(LPT) of the computer, using a standard 25P male/female parallel cable.
6
Advertisement
Table of Contents
