Advertisement
Quick Links
Quick Installation Guide
IPM-4220/IPM-8220
IP-based 4-/8-port Switched
Power Manager
1. Package Contents
Thank you for choosing PLANET IP-based Switched Power Manager. The
Switched IPM provides the useful function of managing power for any
combination to connect with itself.
Open the box of the Switched IPM and carefully unpack it. The box
should contain the following items:
Switched IP Power Manager x 1
Power Cord x 1
If there is any item missing or damaged, please contact
the seller immediately.
Note
2. Installation Precautions
Please set the maximum power-off protection allowed by power circuit
as per the rated current information indicated on the device with
reference to the local state rules, safety procedures and disconnector
deviation.
The unit can only be connected to a grounded power outlet or system.
Make sure the total current output of all the connected systems within
the rated current indicated on the device.
Quick Guide x 1
Rack-mounting Kit (Only for IPM-8220) x 1
– 1 –
Advertisement
Related Manuals for Planet Networking & Communication IPM-4220
Summary of Contents for Planet Networking & Communication IPM-4220
- Page 1 Quick Installation Guide IPM-4220/IPM-8220 IP-based 4-/8-port Switched Power Manager 1. Package Contents Thank you for choosing PLANET IP-based Switched Power Manager. The Switched IPM provides the useful function of managing power for any combination to connect with itself. Open the box of the Switched IPM and carefully unpack it. The box should contain the following items: ...
-
Page 2: Physical Introduction
Please avoid any items or liquids entering the device because their contact with dangerous voltage points or short-circuit parts may cause a fire or electric shock. 3 Physical Introduction Rear Panel : IPM-4220 Front Panel : System Indicating Light Slow flashing: Normal operating Rapid flashing: Normal updating... -
Page 3: Panel Operation
COM2/1 2 Com Ports provided to enable terminal control, API control and 2 mutual cascading Circuit Breaker Protection Power Inlet Power On/Off Switch Power Outlet Note: The maximum output current is 16 amps. LCD Panel To display total current, voltage and IP Switch/Set button Provide LCD panel in order to switch the total current and IP;... - Page 4 IP Display ■ IP indicating light remaining lit. ■ IP indicating light remaining lit. ■ IP indicating light remaining lit. LCD menu shows the total current. è Hold the Switch/Set button „ for 3 seconds with a long beep to enter alarm current setting. è Press the Switch/Set button to increase the alarm current by 0.5A in each press.
- Page 5 Reset Button RJ45 Ethernet Port USB Connected Port (Future Feature) COM2/1 2 Com Ports provided to enable terminal control, API control and 2 mutual cascading Circuit Breaker Protection Power Inlet Power Outlet Note: The maximum output current is 16 amps. LCD Panel To display total current, branch 1, branch 2, voltage and IP Switch Button...
- Page 6 Branch 1 Max. Current Branch 1 Current LCD menu shows total current, and current values of branch 1 and „ „ branch 2. è Hold the Set button for 3 seconds with a long beep to enter alarm current setting. è Enter flash mode (LCD will flash after entering setting mode, "S"...
- Page 7 Press the Set button to show "maximal power outlet current „ „ record", è Hold the Set button for 3 seconds with a long beep to adjust to a zero point. Hold the Switch button for 3 seconds with a long beep in Port ...
-
Page 8: Further Information
Step 3: Enter the IP address and login to the homepage of Switched IPM. 5. Further Information The above steps introduce the simple installation of the Switched IPM. For further details on the installation of the Switched IP Power Manager, please refer to the user manual which you can be downloaded from the PLANET website.