Changing The Default Repeater Shifts; Checking The Repeater Uplink (Input) Frequency - Yaesu VX-150 Operating Manual

Changing the Default Repeater Shifts

If you travel to a different country, you may need to change the default repeater shift so as
to ensure compatibility with local operating requirements.
To do this, follow the procedure below:
•
Press the [ F/W ] key, then immediately press the [ 0 ( SET ) ] key to enter the Set mode.
‚
Rotate the DIAL to select Menu Item #3 ("RPT
ƒ
Press the [ F/W ] key to enable modification of the current setting.
„
Now rotate the DIAL knob to select the new repeater shift magnitude.
...
Press the PTT key momentarily to save the new setting and exit.

Checking the Repeater Uplink (Input) Frequency

It often is helpful to be able to check the uplink (input) frequency of a repeater, to see if the
calling station is within direct ("Simplex") range.
To do this, just press the [ REV ( HM )] key momentarily. If Menu Item #20 ("REV
HM HM HM" you may press the [ F/W ] key, and then [ REV ( HM )] key. To return to the HM
been set to "HM
normal uplink/downlink frequency relationship, repeat this step.
VX-150 O
PERATING
M
ANUAL
Advanced Operation
RPT RPT
RPT RPT").
REV/HM REV REV HM") has HM HM
REV HM
13