Table of Contents
Advertisement
1.18
Setting up your machine
System setup
Ringer volume
You can adjust the volume of the ringer to the desired loudness.
1. Press Menu, then press System Setup on the one-touch keypad.
The display shows 'RINGER VOLUME ?'.
2. Press Start/Enter, then use " or ❷ to choose the desired loudness of the
ringer.
The selected ringer sounds and the display shows the loudness level with
> symbol.
No > symbol turns the ringer off. The machine will work normally even
if the ringer is turned off.
3. Press Start/Enter when the desired volume level is selected. The display
shows the next setup menu 'DEFAULT SETTINGS ?' For details on
menu, see below.
4. To return to standby mode, press Stop.
Home resolution and home contrast
The print resolution and contrast can be set to their most frequently used
modes. Whenever a document is sent or copied, the home contrast and
resolution mode will be activated unless otherwise changed by using
Resolution or Contrast button on the control panel. See page 2.8 for
details.
1. Press Menu, then press System Setup on the one-touch keypad.
The display shows 'RINGER VOLUME ?'.
2. Press " or ❷ until you find 'DEFAULT SETTINGS ?'.
RINGER VOLUME
[>>>>>>>>
]
Advertisement
Table of Contents
