Table of Contents
Advertisement
Display
NO. NOT ASSIGNED
NO PAPER
SUPPLY PAPER
OVERHEAT
PAPER JAM 0
OPEN/CLOSE DOOR
PAPER JAM 1
OPEN/CLOSE DOOR
PAPER JAM 2
CHECK INSIDE
POLLING ERROR
TONER LOW
TONER EMPTY
FUSER ERROR
ENGINE ERROR
Meaning
The one-touch or speed dial location
you tried to use has no number
assigned to it.
The recording paper has run out.
The printer part in your unit has
overheated.
Recording paper has jammed in
paper feeding area.
Recording paper has jammed inside
the unit.
The jammed paper still remains
inside the unit.
The remote fax machine you want to
poll is not ready to respond to your
poll.
Or
When setting up to poll another fax
machine, you have used an incorrect
poll code.
The toner is almost empty.
The toner cartridge has run out .
The machine stops.
There occurs a problem in the fuser
unit
A problem has occurred in the LSU
(Laser Scanning Unit)
Solution
Dial the number manually with the
keypad, or assign the number.
Load the recording paper.
Please wait until it cools down. If
you cannot solve the problem,
please call service.
Clear the jam.
Clear the jam.
Clear the jam.
The remote operator should know
in advance that you are polling
and have their fax unit loaded
with the original document.
Enter the correct poll code.
Take out the toner cartridge
machine and gently shake it. By
doing this, you can temporarily
re-establish printing operations.
Replace with a new toner
cartridge.
Unplug the power cord and plug
it in again. If you cannot solve the
problem, please call service.
Unplug the power code and plug
it in again. If you cannot solve the
problem, please call service.
Troubleshooting
3.7
Advertisement
Table of Contents
