Record Mode; Event Record - Samsung SHR-6040 User Manual

RECORD mODE

The details of the record menu are as follows:
Record mode
Video Size
CIf
CIf
CIf
CIf
Default
Set the recording mode values to be applied when
pressing the ReC button on the front panel.
 Video Size
Set the screen size for recording.
Video Full D1
Source
NTSC 704 x 480
PAL 704 x 576
 Quality
Sets the recording video quality.
Set to any of Very High, High, Standard and Low.
 Frame
Sets the number of frames for recording. The number
of frames refers to the number of screens recorded per
second.
 Auto Detection
You can select any of OFF and ON by pressing "OFF."
If "ON" is selected, the date for search is limited.
The date can be limited to 1 to 99 days. If "OFF" is
selected, the cursor cannot be moved to the date
selection area and the date for search is not limited.
If you press "Default", it returns the initial values.
Frame rate setting must be not until go over NTSC 90
fps, PAL 75 fps Frame rate by each channel of both
Recording mode and Event Recording mode in Full D1
standards.
Quality frame
Standard 30
Standard 30
Standard 30
Standard 5
Auto Detection
ON 99
OK Cancel
Half D1 CIF
704 x 240 352 x 240
704 x 288 352 x 288

EVENT RECORD

The details of the event recording are as follows:
SHR-6042/6040 mENU
System ►
Camera
►
monitoring ►
Record mode
Event Record ►
Event Record Setup
Alarm Detection Setup
Record Schedule
motion Detection Setup
Backup
Video Loss Detection Setup
Network
►
move/Control Select
Event Record Setup
Event Record Setup
Video Size
CIf Standard
CIf Standard
CIf Standard
CIf Standard
Pre Event Post Event
3 sec 10 sec
Default
Set the recording mode values to be applied when an
event occurs.
 Video Size
Screen setup size displayed on record mode.
Video Full D1 Half D1
Source
NTSC 704 x 480 704 x 240
PAL 704 x 576 704 x 288
 Quality
Sets the recording video quality for any event.
 Frame
Sets the number of frames for recording. The number
of frames indicates the number of screens recorded
per second.
 Pre event
Pre-Event Section
Record the pre-conditions from the point that an event
has occurred.
3~5 Seconds: Set the recording time prior to the
event occurrence.
Exit
Quality frame
30
30
30
5
OK Cancel
CIF
352 x 240
352 x 288
Time that an event has occurred
menu setup _31