Spot Mode
Spot Out
monitoring Type
Duration
Off
Camera
move/Control
When you have two monitors, the Spot Out channel can
be used for monitoring a specific channel on a dedicated
monitor.
event Duration
Sets whether or not to run the Event Monitoring
function for the Spot-out channel. It can be set to any
of Off, 30 seconds, and CONTINUE.
OFF: The Event Monitoring function is not available on
the Spot Out channel.
CONTINUe: The Event Monitoring screen will be
maintained until it is cancelled by pressing the ALARm
button on the front panel.
Normal Duration
1~60 Seconds: It sets the display duration of the
current channel until the next channel is displayed.
Camera
Sets the desired channel for use with the Spot Out
function.
30_ menu setup
Event
Normal
3 SEC
OK
Cancel
Select
Exit