Camera - Samsung SHR-6040 User Manual

CAmERA

Camera Settings
The Camera tab contains camera enable/disable and
video source brightness, contrast, and color options.
This tab also contains camera security options. Select a
camera you wish to configure from the server list located
on the right side of the screen.
2
3
4
5
6
7
1. Camera:
Select the camera channel you wish to configure.
2. Name:
Enter the name of the selected camera's zone.
3. Video:
Enable/disable the selected camera.
4. Screen Conversion:
Set the screen conversion time.
5. Video Settings:
Adjust the source signal's brightness, contrast, and
color levels.
6. Apply to All:
Use this feature to apply the selected camera's video
settings to all or a designated group of cameras.
7. Reset:
Resets brightness, contrast, and color levels to their
default settings.
8. Screen:
Displays the selected camera's video feed. It's possible
to view video settings adjustments in real-time.
- Adjusting video settings does not correct improperly
recorded video clips; therefore, it's important that
both the camera and the monitor are properly
calibrated before recording video.
PTZ Device Settings
Your DVR system supports remote control of external
devices such as a PTZ or a Speed Dome. Before using
this feature, however, you will first need to connect the
external device to the system via the RS485 port and
configure the connected external device.
2
3
4
1
5
1. Camera:
Displays configured camera channels.
2. enable/Disable:
Enables/disables the configured camera's PTZ feature.
3. ID:
Designate an ID for the configured PTZ.
4. Protocol:
Designate the communication protocol you wish to use
with the configured PTZ or Speed Dome.
5. Baud Rate:
Designate the baud rate for the configured PTZ.
RemOTe CONTROL DeVICe
This tab is used to configure the ID and baud rate for
remote control devices.
1
appendix _55