Table of Contents
Advertisement
ACE PLUS CORP.
EX-G083 HDMI 1.3 over Single CAT5 Receiver
HDMI-OUT: Connect to a HDMI display with a HDMI M-M cable here.
EQ: Adjust the 8-level equalization control knob to the received HDMI signals. 0 – 7 = strongest –
weakest. It is recommended to switch from 7 to 0 to find the optimal visual experience.
EX-G015 2x8 HDMI over Single CAT5 Distribution
Amplifier
1
2
3
1.
+5V DC: Power jack for 5V4A DC
2.
HDMI In1: HDMI Input1 for connecting to a HDMI source here
3.
HDMI In2: HDMI Input2 for connecting to a HDMI source here
4.
EDID: DIP Switch (see the definition in the next section)
5.
Out1 – Out8: RJ-45 Output 1-8 to link to the HDTV through HDMI over CAT5 receiver CV-715 or
EX-G076B
DIP Switch
Switch
Position
Pin#1
Pin#2
Pin#3
Pin#4
Pin#5
Pin#6
Page 10 of 18
EQ
HDMI-OUT
4
[ ]
OFF
Input HDMI source #1
Source 1 use default EDID
Source 2 use default EDID
3
7.1 Channel
HDMI 1.2 output
HDMI mode output
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: +886-2-2912-4201
FAX: +886-2-2912-3164
Website:
5
[ ]
ON
Input HDMI source #2
Source 1 use learned EDID
Source 2 use learned EDID
2 Channel
HDMI 1.3 output
DVI mode output
www.ace-plus.com
1
2
Advertisement
Table of Contents
