However, like all electronic equipments, the EX-G015 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
Page 3
ACE PLUS CORP. Introduction The EX-G015 2x8 HDMI 1.3 over Single CAT5 Distribution Amplifier provides the most flexible solution by which the high definition video and high quality audio can be transmitted to different locations over a long distance. The devices are cascadable, allowing you to extend HDMI compliant displays almost anywhere.
Page 4
Input DDC signal 5 Volts [peak-to-peak, TTL] [1] Human body model — ±15kV [air-gap discharge] & ±8kV [contact ESD protection discharge] [EX-G015 & EX-G076A] [2] Core chipset — ±8kV PCB stack-up 4-layer board [impedance control — differential 100Ω; single 50Ω] Input...
ACE PLUS CORP. Panel Descriptions EX-G015 1. +5V DC: Power jack for 5V DC 2. HDMI INPUT 1: Connect to one HDMI source here 3. HDMI INPUT 2: Connect to another HDMI source here 4. EDID & Audio: DIP Switch (see more detail in the next section) 5.
Page 7
ACE PLUS CORP. DIP Switch DIP Switch Position Video Audio Description Pin#1 Pin#2 Pin#3 Pin#4 Up to Stereo Default Mode – Up to 1080p & stereo audio output OFF [ ] 1080p for most HDTVs Safe Mode – Enforce the system output at...
ACE PLUS CORP. IR Control Function Function Description Power Turn on/off all eight ports for HDMI over CAT5 ON/OFF transmission Select HDMI INPUT 1 to be the input source Select HDMI INPUT 2 to be the input source Mute button for audio output across all eight ports...
Page 9
ACE PLUS CORP. Notice 1. If the DVI or HDMI device requires the EDID information, please use EDID Reader/Writer to retrieve and provide DVI/HDMI EDID information. 2. All HDMI over CAT5 transmission distances are measured using Belden CAT5e 125MHz LAN cable and ASTRODESIGN Video Signal Generator VG-859C.
Page 10
However, like all electronic equipments, the EX-G015 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
Page 11
ACE PLUS CORP. Notice 1. If the DVI or HDMI device requires the EDID information, please use EDID Reader/Writer to retrieve and provide DVI/HDMI EDID information. 2. All HDMI over CAT5 transmission distances are measured using Belden CAT5e 125MHz LAN cable and ASTRODESIGN Video Signal Generator VG-859C.