Charge Before Use; Change The Battery - Honeywell Dolphin CT50 User Manual

Charge Before Use

Make sure you fully charge the battery before you use your computer.
You can charge the battery before or after you install it in the computer. It
takes about 6 hours for the battery to fully charge in any of the
accessories
•
or
•

Change the Battery

If your battery power is low, you need to either charge the battery in the
computer, or replace it with a charged battery.
Caution: Make sure you completely power off the computer before
changing the battery. Failure to completely power off the computer
can result in the computer crashing and the possibility of having to
reinstall the firmware.
1 Save your files and close any open applications.
2 Press and hold the Power button. This screen appears:
Dolphin CT50 Mobile Computer with Windows 10 IoT Mobile Enterprise User Guide
Insert the battery into a Quad Battery Charger or the battery well of
an eHomeBase.
Insert the computer with the battery installed into an eHomeBase,
ChargeBase, NetBase, Quad Battery Charger, USB Adapter, or
Vehicle Power Adapter.
nd close nd close
P P
old th th
Chapter 1 — About the Computer Features
o either c either c
ed battery d batte
etely po etely po
e to co e to com
r c r cr rashin ashi
7