Page 1
Operator's Instructions Maintenance Instructions Parts List Made in America 650 Series 650 LB Capacity Before installing or using this Lift Gate, please observe the Vehicle Loading Limitations. These loading limitations are outlined in the Vehicle Owner's Manual and the Safety...
The original TOMMY GATE TABLE OF CONTENTS hydraulic lift Introduction Page# To the Owner\Operator Safety Decals 4 & 5 Location and Descriptions Decal Replacement Operator's Instructions Series 650 Terms and Method of Operation 7 & 8 Operator's Instructions Swing Release Latch Operation...
Be sure you read and understand all operating, safety, maintenance and service information. Should you need repair or service information, contact Tommy Gate or an authorized distributor for assistance. This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
OR UNATTENDED. NEVER LEAVE PLATFORM DOWN TO BE USED AS A STEP. ALL REPAIRS OR REINSTALLATIONS OF TOMMY GATE LIFTS SHOULD BE PERFORMED BY AN AUTHORIZED DISTRIBUTOR THAT IS FAMILIAR WITH ITS OPERATION AND SAFETY FEATURES. ALL REPLACEMENT PARTS MUST BE OF ORIGINAL QUALITY, AND ALL...
The original TOMMY GATE DECAL LOCATIONS AND DESCRIPTIONS hydraulic lift WARNING TOMMY GATE CO. TOMMY LIFT PART NUMBER SERIAL NUMBER Do not ride the platform. This lift is not designed as a wheelchair or WOODBINE MANUFACTURING CO. personnel lift. WOODBINE, IOWA...
Series 650 Terms and Method of Operation hydraulic lift Your Tommy Gate is connected to your vehicle battery. The vehicle battery powers a motor, coupled to a hydraulic pump. This motor and pump combination is called a power unit. Flow from the pump will compress a cylinder to lift the platform.
ON" hidden switch again. To activate the control, press the "LIFTGATE ACTIVATED" hidden switch twice within one second (located under the Tommy Gate logo). You should see the red "LIFTGATE ACTIVATED" light when the control is activated. To lower the platform, push the toggle switch down. To raise the platform, push the toggle switch up.
The vehicle doors should be closed and locked before leaving the truck unattended. Step 10. The Tommy Gate is designed for material handling only and is not to be used as a personnel or wheelchair lift. Do not ride on the platform and always stand clear of the platform when opening, raising, or lowering.
The original TOMMY GATE SWING RELEASE LATCH OPERATION hydraulic lift Swing Release Lever Swing Release Figure 1 Swing Release Latch Assembly Figure 2 Position the gate parallel with the sidewall of the vehicle. Latch Engaged (Not available for some vans) Step 1.
ELECTRICAL WIRING DIAGRAM The original TOMMY GATE hydraulic lift Standard Pendant Control-Series 650 NOTE !!! IF GATES ARE NOT WIRED PLEASE READ AND FOLLOW ALL IN ACCORDANCE WITH THIS DIAGRAM DIRECTIONS BEFORE PROCEEDING YOUR WARRANTY WILL BE VOID. IMPORTANT WELDING NOTE !!! DISCONNECT ALL BATTERY CABLES.
All replacement parts must be of original quality, and all safety and operational decals must be attached. No modifications are allowed to a Tommy Gate product unless authorized by the Engineering Department at Tommy Gate.
Parts must be installed according to Tommy Gate Company's specifications. Tommy Gate Company will not pay labor for removing other equipment to gain access to Tommy Gate Equipment. Tommy Gate Company will not pay labor for time on the road to and from a service call.
Page 15
Action taken and cost involved, complete with work orders and parts expense invoices. 6. If defective parts are to be returned to Tommy Gate Company, the parts: a. Must be packaged for each individual warranty return. No multiple warranty claims in the same box.
The original TOMMY GATE SERIES 650 hydraulic lift REPAIR PARTS LIST ITEM# DESCRIPTION Support Tube Assembly Main Lift Tube Platform Latch Vertical Lift Tube Platform Self-close Tube Kit Flipper Arm Self-closing Rod Flipper Stop Hinge Tube Torsion Spring Cylinder with Hose...
Page 18
The original TOMMY GATE hydraulic lift This page is intentionally left blank. Page 18 of 20 DPN: 009119 Rev 9 8-1-18...
The original TOMMY GATE SERVICE RECORD hydraulic lift LIFTGATE INFORMATION Date of Purchase: Serial Number: Installed By: Model Number: Reminders: Service liftgate according to page 11. Date of Service Services Performed Page 19 of 20 DPN: 009119 Rev 9 8-1-18...
The original TOMMY GATE hydraulic lift America's First Name in Liftgates Corporate Offices: Manufacturing Plant: 83 Bus Brown Drive 33717 N. Scottsdale Rd. Ste 120 Woodbine, Iowa 51579 Scottsdale, AZ 85266 FAX (602) 955-3902 FAX (712) 647-2417 (712) 847-8000 www.tommygate.com...
Need help?
Do you have a question about the 650 Series and is the answer not in the manual?
Questions and answers