Settings 3 Call Forward; Settings 4 Network Info; Settings 5 User Data Init - Samsung OfficeServ SMT-I5220 User Manual

Settings 3 Call Forward
You can set set or cancel a call transfer method.
The user can enable call forwarding for all calls, during busy times, or in the event of no answer.
In idle mode, press the Set. soft button.
Select the 2 Settings 3 Call Forward
Press the Enter[OK] button.
Select the Type of Call Forward
Enter[OK] button.
Enter the Forward Number Press the
Enter[OK] button
1 Phone
2 Settings
1 Application Set.
2 Absent Messages
3 Call Forward
Back
4 Network Info.
Back
Press the
Disable
Forward All
Forward Busy
Forward No Answer
Back
[Forward Number]
9876
Save Del. Back
Settings 4 Network Info.
Shows IP, MAC information and LAN connection status.
In idle mode, press the Set soft button.
Select the 2 Settings 4 Network Info.
Press the Enter[OK] button.
Enter the Password Press the Enter[OK]
button.
The default password is "1234".
You can show the Network Mode, IP, Subnet
Mask, Gateway, DNS1 and DNS information.
Settings 5 User Data Init.
Initializes the phone by entering a password.
In idle mode, press the Set. soft button.
Select the Phone Setting 5 User Data Init.
Press the Enter[OK] button.
Enter the Password Press the Enter[OK] button.
The default password is "1234".
1 Phone
2 Settings
1 Application Set.
2 Absent Messages
3 Call Forward
Back
4 Network Info.
Back
[Network Info]
Enter Passward.
* * * *
Delete Back
[Network Info.]
Mode:Static IP
IP: 23.30.156.121
SUBNETMASK:
Back
1 Phone
2 Settings
2 Absent Messages
3 Call Forward
4 Network Info.
Back
5 User Data Init.
Back
[Reboot Phone]
Wait for a minute.