Gardena Smart Irrigation Control Operator's Manual
  1. Manuals
  2. Brands
  3. Gardena Manuals
  4. Control Unit
  5. Smart Irrigation Control
  6. Operator's manual

Gardena Smart Irrigation Control Operator's Manual

Hide thumbs Also See for Smart Irrigation Control:
Table of Contents

Advertisement

Quick Links

Art. 19032
EN
Operator's manual
smart Irrigation Control

Advertisement

Table of Contents
loading

Related Manuals for Gardena Smart Irrigation Control

Summary of Contents for Gardena Smart Irrigation Control

  • Page 1 Art. 19032 Operator’s manual smart Irrigation Control...

  • Page 2: Table Of Contents

    GARDENA smart Irrigation Control 24 V 1. SAFETY ..........
  • Page 3 Intended use: The GARDENA smart Irrigation Control is intended for private use in domestic and hobby gardens, to control sprinklers and watering systems. It can be used for automatic watering during holidays. It is only intended for use in a weatherproof and dust-proof location.

  • Page 4: Safety

    Electrical safety controlling commercially available 24 V (AC) valves. The electric power consumption per channel must DANGER! Cardiac arrest! not exceed 400 mA (a GARDENA Irrigation Valve Art. 1278 requires This product makes an electro­ 150 mA). magnetic field while it operates.
  • Page 5 Personal safety Protect the product from direct sunlight. DANGER! Risk of suffocation! Small parts can be easily swal­ lowed. There is also a risk that Be careful when touching the polybag can suffocate tod­ the valves! dlers. Keep toddlers away when you assemble the product.

  • Page 6: Assembly

    2. ASSEMBLY To assemble the irrigation control on the wall: The both screws and dowels are in the skope of delivery. The distance between the holes is 120 mm. 1. Remove the cover...
  • Page 7 S/N: 00000000 24 VAC VALVES MASTER 5 6 C C M RESET 5s 120 mm 2. Mark the positions of the holes. To do this, hold the Irrigation Control against the wall, bring it straight and mark 2 holes at a distance of 120 mm.

  • Page 8: Installation

    3. INSTALLATION To remove the cable strain relief: S/N: 00000000 24 VAC VALVES MASTER 5 6 C C M RESET 5s v Loosen both screws and remove the cable strain relief...
  • Page 9 Connection overview: S/N: 00000000 24 VAC VALVES MASTER 5 6 C C M PUMP CONTROL 24 VAC POWER RESET 5s SUPPLY 1 2 3 4 5 6 C C C C 1 2 3 4 5 6 C C C C (ART.
  • Page 10 To connect the valves to the Valve Box: Make sure that the terminal block has been correctly installed in the valve box. 1 2 3 4 5 6 C C C C (ART. 1278) (ART. 1278) (ART. 1278) v Label the valves (1 – 6) with the yellow stickers of the valve box. (Therefore the signal cable terminals VALVES 1 –...
  • Page 11 " 1 2 3 4 5 6 C C C C v Connect a cable of the valve V1 to the signal cable terminal 1 of the Valve Box. v Connect a cable of the valve V2 to the signal cable terminal 2 of the Valve Box.
  • Page 12 § 1 2 3 4 5 6 C C C C v Connect the other cable of the valve V1 to a signal cable terminal C of the Valve Box. (All 4 signal cable terminals C are connected to each other and equivalent). v Connect the other cable of the valve V2 to a signal cable terminal C of the Valve Box.
  • Page 13 To connect the Valve Box to the Irrigation Control: Tip: Press down the signal cable terminal with your index finger, screwdriver or ballpoint pen to connect the cables. With the GARDENA Connection Cable Art. 1280 you can connect up to 6 valves with the Irrigation Control. S/N: 00000000...
  • Page 14 S/N: 00000000 24 VAC VALVES MASTER 5 6 C C M RESET 5s 1 2 3 4 5 6 C C C C 1 2 3 4 5 6 C C C C v Connect one signal cable terminal C of the Valve Box to the blue signal signal cable terminal C of the Irrigation Control.
  • Page 15 For example, you can activate a garden pump via the master channel so that the pump supplies the irrigation system whenever a valve is activated. For example, the pump can be operated using the GARDENA Pump Control Art. 1273 that is connected to the master channel.
  • Page 16 To connect the power supply: CAUTION! The irrigation control is damaged if the power supply unit is con­ nected to cable terminals other than the 24 V (AC) cable terminals! V Connect the power supply unit to the 24 V (AC) terminals only! CAUTION! Damaging of the irrigation control system by short circuit! V Check all wiring before you plug in the power supply.
  • Page 17 S/N: 00000000 24 VAC VALVES MASTER 5 6 C C M 24 VAC POWER RESET 5s SUPPLY 1 2 3 4 5 6 C C C C 1 2 3 4 5 6 C C C C 1. Connect both cables to the cable terminals 24 V (AC) of the Irrigation Control (polarity does not have to be considered).
  • Page 18 To close the cover: S/N: 00000000 24 VAC VALVES MASTER RESET 5s 1. Attach the cable strain relief and tighten the two screws 2. Push the cover onto the Irrigation Control.

  • Page 19: Operation

    4. OPERATION LED Display: LED Power: Green: Power On LED Connection display / Signal: Green flashing: While connecting Green: Signal strength high Yellow: Signal strength medium Red: Signal strength low Red flashing: Inclusion mode failed LED Active watering: Green...
  • Page 20 Operation with the GARDENA smart system App: You can use the GARDENA smart system app to control all smart system products from anywhere at any time. You can download the free GARDENA smart system app from the Apple App Store or from the Google Play Store.
  • Page 21 S/N: 00000000 24 VAC VALVES MASTER RESET 5s The smart Irrigation Control will be reset to the factory settings. v Push the Reset key for a short time. New connection. – or – v Push and hold down the Reset key for at least 5 seconds.

  • Page 22: Maintenance

    5. MAINTENANCE To clean the Irrigation Control: Do not use caustic / abrasive cleaning agents. v Clean the Irrigation Control with a damp cloth (do not use solvent). 6. STORAGE To put into storage: The product must be stored away from children. v Do not store the Irrigation Control outdoors if not in use.

  • Page 23: Troubleshooting

    7. TROUBLESHOOTING Problem Possible Cause Remedy LED Power Undervoltage v Check the power illuminates red connection. Wrong power supply. v Check the power supply. MCU Communication v Reset the irrigation control error. to factory settings. LED Active Can’t open valve because v Check the program.
  • Page 24 No wireless connection to v Check the wireless the Gateway. connection to the Gateway. NOTE: For any other malfunctions please contact the GARDENA service department. Repairs must only be done by GARDENA service departments or specialist dealers approved by GARDENA.

  • Page 25: Technical Data

    Max. Output current EC Declaration of Conformity: Hereby, GARDENA Manufacturing GmbH declares that the radio equipment type (smart Irrigation Control Art. 19032) is in compliance with directive 2014/53/EU. The full text of the EC declaration of conformity is available at the following internet address: http://www.gardena.com/int/support/safety­regulations...

  • Page 26: Accessories

    9. ACCESSORIES GARDENA Pump Control Art. 1273 GARDENA Watering Valve 24V Art. 1278 GARDENA Valve Boxes Art. 1254 / 1255 GARDENA Connection Cable Art. 1280 GARDENA Cable Clips Art. 1282...

  • Page 27: Service / Warranty

    In the event of a warranty claim, please send the defective product together with a copy of the purchase receipt and a description of the defect, suffi- ciently stamped, to the GARDENA service address on the back page. Product liability:...
  • Page 28 Autoput za Novi Sad bb # 8355 comuna Las Condes © GARDENA © GARDENA Phone: (+ 56) 2 202 4417 http : // www.gardena.com / fr Ateities pl. 77C 11273 Belgrade Manufacturing GmbH Manufacturing GmbH N° AZUR : 0 810 00 78 23...

Table of Contents