Center Skid Shoe; Wing Skid Shoe - Land Pride RCM3620 Operator's Manual

Rotary cuters
Table of Contents

Advertisement

Section 5: Maintenance & Lubrication
Skid Shoes
!
WARNING
To avoid serious injury or death:
Excessive wear on skid shoes may cause inadequate operation
of cutter and create a safety hazard.
There is one skid shoe mounted on each wing deck and
two skid shoes mounted on the center deck. Check all
skid shoes for wear and replace if necessary. Order only
genuine Land Pride parts from your local Land Pride
dealer.

Center Skid Shoe

Refer to Figure 5-2:
Replace center skid shoes as follows:
1.
Remove 1/2" hex whiz nuts (#4), 1/2" hex bolts (#3),
and center skid shoes (#2) from center deck (#1).
2. Attach new skid shoes (#2) to cutter with existing
1/2"-13 x 2" GR5 hex bolts (#3) and secure with 1/2"
hex whiz nuts (#4). Tighten whiz nuts to the correct
torque.

Wing Skid Shoe

Refer to Figure 5-3:
NOTE: Wing skid shoes can be reversed and
mounted on the opposite wing to increase their life.
1.
Remove 3/8" whiz nuts (#5A), carriage bolts (#4),
and hardened skid shoes (#2) from both wing decks.
2. Remove 3/8" whiz nuts (#5), plow bolts (#3), and
wing skid shoes (#1) from both wing decks.
3. Inspect plow bolts for wear and replaced if needed.
4. Inspect skid shoes (#1) and hardened skid
shoes (#2) for wear. If skid shoes can be reversed
and reused, reattach existing skid shoes to the
opposite wing deck.
5. Attach new/existing hardened skid shoes (#2) to
cutter side panels with removed 3/8"-16 x 1 1/4" GR5
carriage bolts (#4) and whiz nuts (#5A). Do not
torque nuts tight at this time.
6. Attach new/existing skid shoes (#1) to cutter side
panels with new/existing 3/8" -16 x 1 1/4" GR5 plow
bolts (#3) and hex whiz nuts (#5).
7.
Tighten whiz nuts (#5 & #5A) to the correct torque.
40
RC3620 & RCM3620 Rotary Cuters 330-841M
Table of Contents
#
Part No.
2 330-802H CENTER SKID SHOE
#
Part No.
1 330-835D WING SKID SHOE
2 331-120H HARDENED WING SKID SHOE
3 802-466C PLOW 3/8-16X1 1/4 GR5
4 802-155C RHSNB 3/8-16X1 1/4 GR5
5 803-198C NUT HEX WHIZ 3/8-16 PLT
Description
Center Skid Shoe
Figure 5-2
Description
Wing Skid Shoe
Figure 5-3
33872
39151
9/25/18

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rc3620

Table of Contents