Charging The Batteries; Attaching The Belt Clip; Changing The Display Language - Gigaset E630 User Manual

Charging the batteries

¤
Charge the batteries fully prior to first use in the
charging cradle.
The batteries are fully charged when the power icon
disappears from the display.
Batteries may heat up during charging. This is not dangerous.
After a time, the charge capacity of the battery will decrease for technical reasons.
Handsets contained in the package have already been registered to the base. In the
event that a handset is not registered however, (indicated by "Please register hand-
set"), register the handset manually (

Attaching the belt clip

The handset has notches on each side for attaching
the belt clip.
•
Attaching the belt clip:
the back of the handset so that the tabs on the
belt clip click into place in the notches.
•
Removing the belt clip:
belt clip firmly with your right thumb.
nail of your left thumb up between the clip and
the casing. Slide the clip upwards to remove.

Changing the display language

You can change the display language, if the telephone has been set to an incomprehensible
language.
¤
Press the centre of the control key
¤
Press the keys
language settings display appears, the set language
(e. g. English) is highlighted (
¤
To select a different language:
the desired language is highlighted on the display,
e. g. Francais press the key on the right directly underneath
the display to activate the language.
¤
To revert to idle status:
Press the belt clip onto
Press the centre of the
.
and slowly and successively . . . the
= selected).
Press the control key
Press and hold the End call key
p. 48).
Push the
until
Handset
7.5 h
Example:
Deutsch
English
Francais
11