Getting Started; Pairing; Starting With The Earbuds Powered Off - Aukey EP-T1 User Manual

Getting Started

Fully charge the charging case before first use. Connect the charging case to a USB charger or charging
port with the included micro-USB cable. When the red charging indicator stops flashing and stays on, the
charging caseis fully charged. Charging takes around 2 hours. Charge and store the earbuds in the charging
case. After being fully charged, the case can fully charge the earbuds 6 times. When charging the earbuds
(with power disconnected), the charging indicator will besolid blue. It will flashing blue when the charging
case has low power.

Pairing

Starting with the earbuds powered off:

1. Press and hold the multi-function button on the left earbud ('host'– the master earbud) for 5 seconds
or until the LED indicator flashes red and green alternately (not just lights up green)
2. Turn on the pairing function of the device you want to pair with the earbuds
3. In the list of available devices, find and select "AUKEY EP-T1." When connected, the LED status indicator
will flash green steadily
4. If a code or PIN is required for pairing, enter "0000"
5. After pairing with the left earbud ('host'), turn on the right earbud ('device'– the earbud that connects
to the 'host' earbud; not your phone or other device) and wait 5 seconds. The right earbud will
automatically connect with the left one via BT