Iii-2-7 [Notification] - Draytek VigorSwitch V1281 User Manual

III-2- 7 [Notification]
III-2- 7 [Notification]
Configure hosts to receive SNMP v1/v2/v3 notifications.
Available settings are explained as follows:
Item
Address Type
Server Address
Version
Type
Community/user
Security Level
Server Port
Timeout
VigorSwitch V1281 User Guide
Description
Choose IPv4/IPv6/Hostname to specify IP address or the
hostname of the SNMP trap recipients.
Enter the IP address of SNMP server based on the address
type selected above.
Specify SNMP notification version (SNMPv1/v2/v3).
Specify Notification Type.
Trap –Send SNMP traps to the host.
Inform - Send SNMP informs to the host. If it is used,
Timeout and Retry also shall be defined.
Use the drop down list to choose one of the
community profiles.
Specify SNMP security level for SNMP notification packet. It
is available when SNMPv3 is selected.
No Security – No authentication.
Authentication – Authentication without encryption will be
performed for packets.
Authentication and Privacy – Authentication with
encryption will be performed for packets.
Specify the UDP port number for the recipient's server.
Use Default – If it is checked, the default number (162) will
be used automatically.
Specify the SNMP informs timeout. It is available when
51