Adjustment Of The Ee23 Model T5 Via The Usb Service Interface; Maintenance; Troubleshooting; Fuse Replacement For Option Am3 - E+E Elektronik EE23 Operation Manual

Humidity/temperature sensor

Hide thumbs Also See for EE23:

Table of Contents

5.3

Adjustment of the EE23 Model T5 via the USB Service Interface

1. Download and install the EE-PCS Product Configuration Software from www.epluse.com/configurator

2. Connect the USB service interface of EE23-T5 to the PC.

3. Start the EE-PCS software.

4. Select the desired adjustment mode and follow the instructions of the EE-PCS.

When employed in dusty, polluted environment:

• The filter cap shall be replaced as needed with an E+E original one. A polluted filter cap causes

longer response time of the device.

• For cleaning of the sensing head please see "Cleaning Instructions" at www.epluse.com/ee23.

See status LEDs at „3 Operating Components" on Page 6 and error messages on the display at „3.4

Display for Model T5" on Page 9.

7.1

If the green LED on the PCB is not flashing with the supply voltage switched on check the fuse and

replace if required.

Fuse secondary:

Recommended replacement types:

Series: MSTU 250

Series: 374

Fig. 11

Fuse replacement

250mA / T UL248-14

Manufacturer: Schurter

Manufacturer: Littelfuse

Order No.: 0034.7109

Order No.: 374 0250

Operating manual EE23 humidity / temperature sensor

Table of Contents