GE Grid Solutions Multilin 9450 Instruction Manual page 91

CHAPTER 6: USING THE EXTERNAL DISPLAYS
EPM 9450/9650 ADVANCED POWER QUALITY METERING SYSTEM – INSTRUCTION MANUAL
• Click the Hardware tab. You will see the screen below.
• Click the Device Manager button. You will see a list of the computer's
hardware devices.
• Click the plus sign next to Ports (COM & LPT). The COM ports are displayed.
Note the COM number for the USB Serial Port. This is the number you will
use to connect to the P40N
below.
USING THE EPM P40NPLUS LED EXTERNAL DISPLAY
PLUS
through GE Communicator. See the figure
6–13