Normal Mode - GE Grid Solutions Multilin 9450 Instruction Manual

ANALOG TRANSDUCER SIGNAL OUTPUT MODULES
9.5.2

Normal Mode

9–10
Normal Mode is the same for the 0-1mA and the 4-20mA Analog Output Modules except
for the number of processes performed by the modules.
Both devices:
1. Accept new values through communication.
2. Output current loops scaled from previously accepted values.
The 0-1mA module includes one more process in its Normal Mode:
3. Read and average the A/D and adjust values for Process 2 above.
The device will operate with the following default parameters:
Address:
Baud Rate:
Transmit Delay Time:
Normal Operation is prevented by a number of occurrences. See Section 9.4 for details.
EPM 9450/9650 ADVANCED POWER QUALITY METERING SYSTEM – INSTRUCTION MANUAL
247 (F7H)
57600 Baud
20 msec
CHAPTER 9: EXTERNAL I/O MODULES