GE Grid Solutions Multilin 9450 Instruction Manual page 90

USING THE EPM P40NPLUS LED EXTERNAL DISPLAY
6–12
2. Connect the USB cable from your PC to the port: using a USA-A Male to USB-B
Male cable, attach the USB-A connector to the PC and attach the USB-B
connector to the P40N
Figure 6-2: USB-B Male Connector and P40N
Once the USB cable is connected to the P40N
"USB in Use" scrolls at the bottom of the display. Additionally, the USB LED icon lights up
when the USB connection is being used. You connect to the USB port using GE
Communicator software the same way you connect to a meter with the software. Follow
these instructions:
1. Determine which port the PC's USB is using:
• On your PC, click Start > Settings > Control Panel.
• Double-click the System folder.
EPM 9450/9650 ADVANCED POWER QUALITY METERING SYSTEM – INSTRUCTION MANUAL
CHAPTER 6: USING THE EXTERNAL DISPLAYS
PLUS
USB port. See Figure 6.1.
PLUS
, the display clears and the message
PLUS
USB Port