Selecting Video Out Type; Lcd Brightness; Quick View; Initialisation - Samsung DIGIMAX L60 User Manual

Selecting Video out type

The Movie output signal from the camera can be
NTSC or PAL. Your choice of output will be governed
by the type of device (monitor or TV, etc.) to which
the camera is connected. PAL mode can support
only BDGHI.
INFORMATION
NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K.,
Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain,
Sweden, Switzerland, Thailand, Norway.
When using a TV as an external monitor, you will need to select the external
or AV channel of the TV.
There will be a digital noise on the external monitor, but it is not a malfunction.
If the image is not in the centre of the screen, use the TV controls to centre it.
The menu functions are the same as those indicated on the LCD monitor.
56
SETUP
USB
LCD
Video Out

Quick View

Reset
Back:
Yellow - Video
White - sound

LCD brightness

You can adjust the LCD brightness.
NTSC
PAL
Set:OK
Quick view
If you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
[Off]
[0.5, 1, 3sec] : The captured image is briefly

Initialisation

All camera menu and function settings will be restored to their default values.
However, values for DATE / TIME, LANGUAGE, and VIDEO OUT will not be
changed.
If [No] is selected :
Settings will not be restored to their defaults.
If [Yes] is selected :
All settings will be restored to their defaults.
: The quick view function can't be
activated.
displayed during the selected time.
SETUP
SOund Dark
USB Normal
LCD Bright
Video Out
Quick View
Back: Set:OK
SETUP
USB off
LCD 0.5 sec
Video Out 1 sec
Quick View 3 sec
Reset
Back: Set:OK
SETUP
USB
LCD
Video Out
Quick View No
Reset Yes
Back: Set:OK