Starting The Slide Show - Samsung DIGIMAX L60 User Manual

Starting the slide show

Images can be displayed continuously at pre-set intervals. You can view the
slide show by connecting the camera to an external monitor.
1. Select the [Show] sub menu by pressing the UP /
DOWN button and press the RIGHT button.
2. Use the Up / Down buttons to select the desired
sub menu.
[Play] selected : The slide show is closed
after one cycle.
[Repeat Play] selected : The slide show is repeated until cancelled.
3. Press the OK button to start the slide show.
- Press the Pause button to pause the slide show.
- Press the Pause button (
- To stop the slide show, press the play & pause button, and then press the
LEFT or RIGHT button.
Setting play interval : Set the slide show play interval.
1. Select the [Interval] sub menu by pressing the
UP / DOWN button and press the RIGHT button.
2. Use the Up / Down buttons to select the desired
interval.
3. Press the OK button to save the configuration.
INFORMATION
The loading time depends on the image size and quality.
While the slide show is playing, only the first frame of a MOVIE file is
displayed.
While the slide show is playing, the voice recording file will not display.
44
SLIDE
Show Play
Interval Repeat Play
Effect
Back:
) again to resume the slide show.
SLIDE
Show 1 sec
Interval 3 sec
Effect 5 sec
10 sec
Back:
Configure slide show effects : Unique screen effects can be used for the slide
1. Select the [Effect] sub menu by pressing the
UP / DOWN button and press the RIGHT button.
2. Use the Up / Down Button to select the type of
effect.
: Normal display.
: Image is displayed slowly.
Set:OK
: Image is displayed slowly from the centre outwards.
: Image moves from the top left.
: The image slides diagonally from top left to bottom right.
: The image slides irregularly.
3. Press the OK button to confirm the setting.
Set:OK
show.
Show
Interval
Effect
Back:
SLIDE
Set:OK