Selecting Video Out Type; Formatting A Memory - Samsung S1050 User Manual

[ Selecting Video out type ]
• The Movie output signalfrom the camera can be NTSC or PAL.
Your choice of outputwill be governed by the type of device (monitor or TV,
etc.) to which the camera is connected. PAL mode can support only BDGHI.
• Connecting to an extemal monitor
• When the camera is connected to an external
monitor in the recording mode or play back mode,
the image (movie or still image) will be visible on
the external monitor and the LCD monitor of the
camera turns off.
[ Formatting a memory]
• This is usedfor formatting the memory. If you run [Format] on the memory, all
images, including the protected images, will be deleted. Be sure to download
important images to your PC before formatting the memory.
• Sub menus
[No] : The memory will not be formatted. Press
the menu button three times and the menu
displaywill disappear.
[Yes] : A [Precessing?]message appears and the
memory will beformatted. If you run
FORMAT in Play mode, a [No Image!]
message will appear.
Be sure to run [Fon'nat]on the following types of memory card.
- A new memory card, or an unformatted memory card
- A memory card that has a file this camera can't recognise or one that has been
taken from another camera.
- Always fon'natthe memory card using this camera. If you insert a memory card
that has been formatted using other cameras memory card readers, or PCs,
you will get a [Card Error!] message.
(37}