Dpof : Print Size; Pictbridge - Samsung DIGIMAX L60 User Manual

DPOF : Print size

You can specify the print size when printing images stored on the memory card.
The [Size] menu is available only for DPOF 1.1 compatible printers.
Setting the Print Size
1. Select the [Size] menu by pressing the UP / DOWN
button and press the RIGHT button.
2. Select a desired sub menu by pressing the
UP / DOWN button and press the OK button.
[Select] : Selection window for an image to be
changed printed size is displayed.
- Up / Down / Left / Right : Select an image.
- Zoom W / T Button : Change the print size.
- OK button : Your changes will be saved and the
menu will disappear.
[All Pics] : Change print size of all saved images.
- W / T button : Select a print size
- OK button : Confirm the changed setting.
[Cancel] : Cancel all of the print size settings.
DPOF [Size] secondary menu : Cancel, 3X5, 4X6,
5X7, 8X10
Depending on the manufacturer and printer model,
cancelling the printing may take a little longer for
the printer to process.
You can use the USB cable to connect this camera to a printer that supports
PictBridge (sold separately) and print the stored images directly. Movie clips and
voice files cannot be printed.
Setting up the camera for connection with the printer
DPOF
1. In any mode with the exception of Voice Recording
Standard Select
All Pics
Index
Cancel
Size
2. Press the LEFT / RIGHT button and select
Back: Set:OK
3. Select [USB] menu by pressing the UP / DOWN
4. Select [Printer] menu by pressing the UP / DOWN
W Cancel T
Set:OK
W Cancel T
Set:OK
If you selected [COMPUTER] in Step 5, when you connect the camera to your
printer, the [USB ERROR!] message will display and the connection will not be
established. In this case, disconnect the USB cable, and then follow the
procedure from Step 2 onwards.

PictBridge

mode, press the MENU button.
[SETUP] menu tab.
button and press the RIGHT button.
button and press the OK button.
SETUP
AF Lamp
Sound Computer
USB Printer
LCD
Video Out
Back: Set:OK
49