Table of Contents
Advertisement
Selecting Video out type
The Movie output signal from the camera can be
NTSC or PAL. Your choice of output will be governed
by the type of device (monitor or TV, etc.) to which
the camera is connected. PAL mode can support
only BDGHI.
Connecting to an external monitor
[Using the AV cable with Cradle]
[Using the AV cable with Camera]
INFORMATION
NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.
PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K.,
Holland, Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain,
Sweden, Switzerland, Thailand, Norway.
When using a TV as an external monitor, you will need to select the external
or AV channel of the TV.
There will be a digital noise on the external monitor, but it is not a malfunction.
If the image is not in the centre of the screen, use the TV controls to centre it.
The menu functions are the same as those indicated on the LCD monitor.
SETUP
Sound
NTSC
USB
PAL
AF Lamp
LCD
Video Out
Back:
Set:OK
Yellow - Video
White - sound
Quick view
If you enable Quick View before capturing an image, you can view the image
you just captured on the LCD monitor for the duration set in the [Quick View]
setup. Quick view is possible only with still images.
[Off]
: The quick view function can't be
activated.
[0.5, 1, 3sec] : The captured image is briefly
displayed during the selected time.
Initialisation
All camera menu and function settings will be restored to their default values.
However, values for DATE/TIME, LANGUAGE, and VIDEO OUT will not be
changed.
If [No] is selected :
Settings will not be restored to their defaults.
If [Yes] is selected :
All settings will be restored to their defaults.
SETUP
USB
off
AF Lamp
0.5 sec
LCD
1 sec
Video Out
3 sec
Quick View
Back:
Set:OK
SETUP
AF Lamp
No
LCD
Yes
Video Out
Quick View
Reset
Back:
Set:OK
57
Hide quick links:
Advertisement
Table of Contents
