Copy To Card; Pictbridge - Samsung DIGIMAX I6 User Manual

Copy To Card

This enables you to copy image files, movie clips and voice recording files on the
camera's built-in internal memory to the camera's removable SD memory card.
Copying to the Memory Card
1. Select a desired sub menu by pressing the
UP/ DOWN button and press the OK button.
- [No] : Cancels "Copy to Card".
- [Yes] : All images, movie clips and voice
recording files saved in the internal
memory are copied to the memory card
after the [Processing!] message is displayed. After copying has been
completed, the screen will return to play mode.
INFORMATION
When this menu is selected without inserting a memory card, you can select
the [COPY TO CARD] menu but the menu can't be run.
If there is not enough space available in the memory card to copy saved
images in the internal memory (45MB), the [COPY TO CARD] command will
copy only some of the images and display [Memory Full!] message. Then the
system will return to the playback mode. Please be sure to delete any
unnecessary files to free up space before inserting the memory card into the
camera.
When you move images from the internal memory to the removable SD
card, they will be automatically renumbered to avoid duplication of the file
name. If the last file in the memory card is SSL20010.jpg, the copied file
names start from SSL20011.jpg. After completing [COPY TO CARD], the
last stored image of the last copied folder is displayed on the LCD monitor.
You can use the USB cable to connect this camera to a printer that supports
PictBridge (sold separately) and print the stored images directly. Movie clips and
voice files cannot be printed.
Setting up the camera for connection with the printer
COPY TO CARD
1. In any mode with the exception of Voice Recording
No
Yes
2. Press the LEFT/ RIGHT button and select
Exit:MENU Move:
3. Select [USB] menu by pressing the UP/ DOWN
4. Select [Printer] menu by pressing the UP/ DOWN button and press the OK button.
Connecting the Camera to a Printer
[Using the USB cable with Cradle]
[Using the USB cable with Camera]

PictBridge

mode, press the MENU button.
[SETUP] menu tab.
button and press the RIGHT button.
Using the USB cable with Cradle : Connect the camera and the cradle.
Using the USB cable with Camera : Connect the camera to a printer's USB
SET UP
Format Computer
Date&Time Printer
Imprint
Sound
USB
Back:
Connect the cradle to a printer's USB port
with the supplied USB cable.
port with the supplied USB cable.
Set:OK
49