Starting The Slide Show - Samsung DIGIMAX I6 User Manual

Starting the slide show

Images can be displayed continuously at pre-set intervals. You can view the
slide show by connecting the camera to an external monitor.
1. Select the [Start] sub menu by pressing the
UP/DOWN button and press the RIGHT button.
2. Use the Up/Down buttons to select the desired sub
menu.
[Play] selected :
The slide show is closed after one cycle.
[Repeat Play] selected :
The slide show is repeated until cancelled.
3. Press the OK button to start the slide show.
- Press the Pause button to pause the slide show.
- Press the Pause button (
- To stop the slide show, press the play & pause button, and then press the
LEFT or RIGHT button.
Repeat setting : Setting the slide show to repeat after the first cycle.
1. Use the Up/ Down buttons to select the [Repeat]
menu and press the Right button.
2. Use the Up/ Down buttons to select the desired
sub menu.
3. Press the OK button to save the configuration.
INFORMATION
The loading time depends on the image size and quality.
While the slide show is playing, only the first frame of a MOVIE file is
displayed.
While the slide show is playing, the voice recording file will not display.
44
SLIDE
Show Play
Interval Repeat Play
Effect
Back:
) again to resume the slide show.
SLIDE
Show 1 sec
Interval 3 sec
Effect 5 sec
10 sec
Back:
Configure slide show effects : Unique screen effects can be used for the slide
show.
1. Select the [Effect] sub menu by pressing the
UP/ DOWN button and press the RIGHT button.
2. Use the Up/ Down Button to select the type of
effect.
: Normal display.
Set:OK
: Image is displayed slowly.
: Image is displayed slowly from the centre outwards.
: Image moves from the top left.
: The image slides diagonally from top left to bottom right.
: The image slides irregularly.
3. Press the OK button to confirm the setting.
Set:OK
SLIDE
Show OFF
Interval
Effect
Back: Set:OK