Intelligent Warming Plate; Brewing; Custom Brews - Ninja CP301 Owner's Manual

PREPARING & USING
THE NINJA HOT & COLD BREWED SYSTEM™

INTELLIGENT WARMING PLATE

The Intelligent Warming Plate will
automatically turn on during a Half
or Full Carafe size of Classic or Rich
Brew. The Intelligent Warming Plate
will adjust the heat it produces to
avoid burning the coffee over time.
IMPORTANT: The HOT SURFACE light will
illuminate when the warming plate is hot.
STAY WARM BUTTON
Press STAY WARM after the brew to
turn the Intelligent Warming Plate off.
You can turn the Intelligent Warming
Plate back on by pressing STAY
WARM again (Fig.14).
TIME & TEMPERATURE
ADJUSTMENT
You can adjust how long the
Intelligent Warming Plate remains
on (up to 4 hours) and/or set the
temperature to High or Low.
By default, the Intelligent Warming
Plate is set to remain on for 2 hours,
and is set to High to keep your
coffee and tea hot. The Low setting
keeps your brew at a slightly lower
temperature to preserve flavor longer.
14
Fig. 14
NOTE: The setting you choose will
apply to both Coffee and Tea.
To change the time/temperature
settings of your warming plate,
follow these instructions:
1 Press and hold STAY WARM until
the clock begins to flash the current
warming time.
2 Quickly press the hour (H)
and/or minute (M) buttons to
increase the time up to 4 hours
or decrease the time to 0 hours.
Press STAY WARM to set the new
time. Or wait 5 seconds, and the
unit will beep, signifying the new
time has been set.
3 Next, the clock will display the
current warming plate temperature.
To keep the same temperature, press
STAY WARM, or wait 5 seconds for
the same temperature to lock in. To
change the temperature, press the
hour (H) or (M) buttons, then press
STAY WARM, or wait 5 seconds for
the temperature to lock in.
NOTE: If you set the warming time
to 0 hours, it will skip the warming
temperature menu.
PREPARING & USING
THE NINJA HOT & COLD BREWED SYSTEM™
Fig. 15a
Fig. 15b Fig. 16a

BREWING

NOTE: Some brews have a pre-infusion
cycle with varying times. The brewing
cycle will begin, then there will be
CP307 P4 BACKLIT UI LAYOUT
a pause for a short period before
2017.12.21
resuming. This process is used to evenly
saturate the coffee grounds or tea.

CUSTOM BREWS

CLASSIC BREW & RICH BREW
NOTE: Rich Brew will use slightly less
water and yield slightly less brewed
coffee or tea than Classic Brew.
1 After filling the water reservoir,
place either the COFFEE or TEA
filter holder into the brew basket.
Add the ground coffee, loose leaf
tea, or tea bags to the filter.
2 Close the brew basket, ensuring
it is securely in place. The control
panel will display either COFFEE
(Fig. 15a) or TEA (Fig. 15b) settings
based on the filter holder that has
been inserted.
NOTE: If the brew basket is closed with
no filter holder in place, both COFFEE
and TEA will flash.
Fig. 16b
3 Use the Multi-Serve dial to select
the brew size. Place the empty
vessel you would like to brew into
under the brew basket.
CP307 P4 BACKLIT UI LAYOUT
2017.12.21
NOTE: If making a single cup, lower
the Single-Serve Cup Platform and set
your vessel in the center of it. Please
ensure you are using at least a 12 oz.
cup for the Cup size, 14 oz. cup for the
XL Cup size, 16 oz. travel mug for the
Travel Mug size, and 20 oz. travel mug
for the XL Multi-Serve size.
4 Turn the START/SELECT dial to
choose either Classic Brew or Rich
Brew (Fig. 16a, Fig. 16b). If brewing
tea, press the Tea button to toggle
to the tea menu, and use the dial
to choose your tea type. To change
your brew style while in the tea
menu, press the Tea button again.
5 Press the START/SELECT dial to
start the brew. A progress bar on the
control panel will show the status
of the brewing cycle. To cancel the
brew at any time, press the dial again
or press the Power button.
6 The unit will beep and the clock
will display End when the brew
is complete.
ninjakitchen.com
15