Over Ice & Cold Brew; Signature Brew; Specialty; Setting The Delay Brew - Ninja CP301 Owner's Manual

PREPARING & USING
THE NINJA HOT & COLD BREWED SYSTEM™
Fig. 17a
OVER ICE BREW & COLD BREW
NOTE: Cold Brew takes about 15
minutes for a Full Carafe.
CP307 P4 BACKLIT UI LAYOUT CP307 P4 BACKLIT UI LAYOUT
2017.12.21 2017.12.21
: Glassware may be used
NOTE
with the Cold Brew setting, but
not the Over Ice Brew setting.
1 After filling the water reservoir,
insert either the COFFEE or TEA
filter holder into the brew basket.
Add the ground coffee, loose leaf
tea, or tea bags to the filter.
NOTE: For COLD BREW coffee ONLY,
add an additional scoop of coffee
grounds to the brew basket.
2 Close the brew basket, ensuring
it is securely in place. The control
panel will display either COFFEE
(Fig. 15a) or TEA (Fig. 15b)
settings based on the filter holder
that has been inserted.
16
Fig. 17b Fig. 18
3 Fill your desired vessel to the top with
ice cubes and place the vessel below
the brew basket. Use the Multi-Serve
dial to select the brew size.
CP307 P4 BACKLIT UI LAYOUT
2017.12.21
NOTE: DO NOT add ice to the
water reservoir.
4 Turn the START/SELECT dial to
choose either Over Ice Brew or Cold
Brew (Fig. 17a, Fig. 17b). If brewing
tea, press the Tea button
to the tea menu, and use the dial to
choose your tea type. To change your
brew style while in the tea menu,
press the Tea button .
5 Press the START/SELECT dial to
start the brew. A progress bar on the
control panel will show the status of
the brewing cycle. To cancel the brew
at any time, press the dial again or
press the Power button.
6 The unit will beep and the clock will
display End when the brew is complete.
PREPARING & USING
THE NINJA HOT & COLD BREWED SYSTEM™

SIGNATURE BREW

SPECIALTY BREW
NOTE: Specialty always yields 4 oz.
of coffee and 6 oz. of tea (with the
exception of Green tea, which
yields 2 oz.).
1 After filling the water reservoir,
insert either the COFFEE or TEA
filter holder into the brew basket.
Add the ground coffee, loose leaf
tea, or tea bags to the filter.
2 Close the brew basket, ensuring
it is securely in place. The control
panel will display either COFFEE
(Fig. 15a) or TEA (Fig. 15b) settings
based on the filter holder that has
been inserted.
3 Place the empty vessel you would like
to brew into under the brew basket.
NOTE: If brewing an iced blended
drink, fill the desired vessel with the
amount of ice recommended in the
recipe before brewing.
4 Turn the START/SELECT dial to
choose SPECIALTY (Fig. 18). If
brewing tea, press the Tea button
to toggle to the tea menu, and
to toggle
use the dial to choose your tea
type. To change your brew style
while in the tea menu, press the
Tea button
5 Press the START/SELECT dial to
start the brew. A progress bar on the
control panel will show the status
of the brewing cycle. To cancel the
brew at any time, press the dial again
or press the Power button.
NOTE: The brewing cycle will begin,
then pause for a short period before
resuming. This process is used to evenly
saturate the coffee grounds or tea.
6 The unit will beep and the clock
will display End when the brew
is complete.

SETTING THE DELAY BREW

NOTE: The unit must remain on for the
Delay Brew function to work. DO NOT
power off after setting Delay Brew.
1 Turn the unit on by pressing the
Power button.
NOTE: The clock will remain on even if
the unit is turned off. Ensure the unit is
powered on to set Delay Brew.
2 After filling the water reservoir and
adding ground coffee or tea to the
correct filter holder, be sure the
reservoir, brew basket, and filter
are securely in place. Place the
appropriate-size vessel under
brew basket.
NOTE: The brew basket must be
securely closed with either the COFFEE
or TEA filter inserted to set Delay Brew.
again.
17
ninjakitchen.com