IMPORTANT SAFEGUARDS READ ALL INSTRUCTIONS BEFORE USE • HOUSEHOLD USE ONLY Read all instructions before using your NINJA HOT & COLD BREW SYSTEM™ When using electrical appliances, basic safety precautions should always be followed, including the following: WARNING 8 DO NOT operate any appliance with...
4 Before first use, prime the system by running a Full Carafe, Classic brew cycle with a Cup water only. After the cycle is complete, discard the water. For detailed instructions, b XL Cup refer to the Priming Your Ninja Hot & Cold Brewed System section. c Travel Mug d XL Multi-Serve e Half Carafe...
5 When the cycle is complete, discard cancel the calibration cycle. the water in the carafe. You are now ready to use your Ninja Hot & Cold Brew System to brew. NOTE: This calibration is permanently saved an will not be lost if power is lost or brewer is unplugged.
NOTE: There may be some water left in the reservoir after your brew. This is normal to For best results, use the coffee 3 Use the Ninja Smart Scoop™ and follow the keep the brewer from running out of water.
PREPARING & USING THE NINJA HOT & COLD BREW SYSTEM™ – CONT. FILLING THE TEA BREW BASKET AUTOMATIC DRIP STOP To change the time/temperature settings of The system is equipped with an automatic For best results, use the tea measurement...
PREPARING & USING THE NINJA HOT & COLD BREW SYSTEM™ – CONT. BREWING OVER ICE BREW & COLD BREW 4 Turn the START/SELECT dial to choose either Over Ice Brew or Cold Brew NOTE: Some brews have a pre-infusion NOTE: If making a single cup, lower the NOTE: Cold Brew takes about 15 minutes cycle with varying times.
PREPARING & USING THE NINJA HOT & COLD BREW SYSTEM™ – CONT. SIGNATURE BREW SPECIALTY BREW 5 If brewing tea, press the Tea button 3 Press DELAY BREW. DELAY BREW will 2 Pour milk into cup, until it is about...
If using a Ninja Hot & Cold Brew System™: brewer will indicate it needs cleaning paper coffee filter, discard it. If using either 4 The clock will display and count down more often.
• Ensure your cup, travel mug, or carafe is filled all the way to the top with ice cubes before brewing. Your Ninja Hot & Cold Brew System™ will brew at elevated temperatures • Run a clean cycle. If you have recently completed a clean cycle, you may need to run a second cycle to remove additional mineral buildup that occurs naturally over time.
REPLACEMENT PARTS PRODUCT REGISTRATION Please visit registeryourninja.com or call 1-877-646-5288 to register your new Ninja® product To order additional parts and accessories, visit ninjaaccessories.com or contact Customer within ten (10) days of purchase. You will be asked to provide the store name, date of Service at 1-877-646-5288.
What is not covered by this warranty? Normal wear and tear of wearable parts (including filter holder, permanent filter, frother whisk, carafe and brew-through lid, water reservoir and flip-top lid, and Ninja Smart Scoop™), which require regular maintenance and/or replacement to ensure the proper functioning of your unit, are not covered by this warranty.
Page 15
NINJA is a registered trademark of SharkNinja Operating LLC. NINJA HOT & COLD BREW SYSTEM and NINJA SMART SCOOP are trademarks of SharkNinja Operating LLC. This product may be covered by one or more U.S. patents. See sharkninja.com/patents for more information.
Need help?
Do you have a question about the Hot & Cold Brew System CP301 Series and is the answer not in the manual?
Questions and answers