Reset Switch; Figure 2-5. Reset Switch - Filtec FT-100 Operation Manual

2.6

Reset Switch

2.6.1 Purpose
2.6.2 Diagram
No. Description
1 Reset switch on the underside
of the operator's station.
2-8
Use the reset switch if there is a computer system failure. The
reset switch reboots the computer without having to stop and
restart the production line.
Note: Do not use the reset switch to clear alarms. You must fix
the problem that caused the alarm rather than disable the
alarm.
Here is what the reset switch looks like.
1
Figure 2-5. Reset Switch
FT-100/CI and FT-170/CI Operation Guide
Document 40275-0913