Optional Flap Inspectors; Figure 2-3. Flap Inspectors Mounted On The Inspection Head - Filtec FT-100 Operation Manual

2.3

Optional Flap Inspectors

2.3.1 Introduction
2.3.2 Diagram
2-4
You can also install optional case flap inspection sensors on an
external bracket on the downstream side of the inspection head.
Figure 2-3 shows you what the flap inspection sensors look like.
Use this diagram to learn what the various optional flap
inspectors look like.
3
4
5
No. Description
1 Trailing flap inspector
2 Leading flap inspector
3 Unslit flap inspectors or side flap inspectors
4 High flap inspector
5 Reference trigger
Figure 2-3. Flap Inspectors Mounted on the Inspection Head
FT-100/CI and FT-170/CI Operation Guide
2
1
Document 40275-0913