Configuring 1-Touch Presets - Trane XL824 User Manual

Configuring 1-Touch Presets

1-Touch Presets provide predetermined Heating
and Cooling Set Points for Home, Away and Sleep
time periods.
Note: 1-Touch Presets require Scheduling to be
disabled. To disable Scheduling, go to HOME >
MENU > SCHEDULES > DISABLE SCHEDULE.
When scheduling is disabled, heating and
cooling set points are maintained indefinitely.
When a temperature change is desired, the user
must manually adjust the XL824 Control to the
new setting.
Configuring 1-Touch Presets
1. To change the Cooling Set Point, press the
blue COOLING SET POINT to activate the
setting. The current System Mode indicator
will display blue wavy lines.
Use the UP and DOWN Arrows to adjust the
Set Point to the desired temperature.
2. To change the Heating Set Point, press the
red HEATING SET POINT area to activate
the setting. The current System Mode
indicator will display red wavy lines.
Use the UP and DOWN Arrows to adjust the
Set Point to the desired temperature.
3. Repeat the process for Home and Sleep settings.
page 18
$
Away
Press Away, Home
or Sleep to adjust
presets
Home
Sleep
4. Press APPLY, then HOME to return to the
Home Screen.
Navigate to Configuring 1-Touch Presets by pressing:
Home Screen > Menu > Settings > 1-Touch Presets
Cooling Set Point
(press to change)
82º
Away Preset
Away
Temperatures
62º
Heating Set Point
(press to change)
Note that when Scheduling is enabled, only the
Away preset is available and can be used for
energy savings.
Press to
increase active
set point
Indicates current
mode
Press to
decrease active
set point
824 User Guide